|
Shipping area selected: rest of world (ie, non-EU) |
Select type of tool:
Standard turning tools
The Brailsford set
Stumpy, Dumpy & ...
Speciality tools
Miniature tools
Sets of standard tools
Return to:
Tools:general description
Entrance to shop
The Fixed Angle Ring Tool
The secret of this tool lies in the precision made cutter. This is attached to the square tool shaft at a pre-set angle. To use the tool one of the faces of the shaft is placed on the tool rest so that the cutting edge is at an angle 45 ° to the horizontal. The cut is made with the shaft horizontal and level with the axis of the lathe. In this position the cutting edge automatically takes up the required attitude for a slicing cut. This makes the tool very easy to use. The tang of the shaft is machined to a cylindrical form which means that it can readily be fitted to a conventional wooden handle or to one with a collet fixing.
The tool is available in two sizes - one has a cutter of ¾ inch (19 mm.) diameter, the other ½ inch (12.5 mm.) diameter. A spare cutter, a spare fixing screw and an Allen Key, are supplied with each tool. Additional cutters are available.
The high-speed steel cutters require sharpening relatively infrequently as they can be rotated by degrees as the edge at the cutting point dulls. When a cutter does require sharpening it can be returned to the factory where it will be re-ground for a charge of £1-00.
Prices:
| Handled tool: 2 x ¾ in. cutters, 2 screws, 1 Allen Key | £25.00 | |||
| Unhandled tool: 2 x ½ in. cutters, 2 screws, 1 Allen Key | £24.00 | |||
| Handled tool: 2 x ¾ in. cutters, 2 screws, 1 Allen Key | £29.10 | |||
| Handled tool: 2 x ½ in. cutters, 2 screws, 1 Allen Key | £27.60 | |||
| Spare ¾ in. cutter | £6.00 | |||
| Spare ½ in. cutter | £5.00 |